|
Model
#
|
Overall
Dimensions
Length
Width
Height
|
Basket
Capacity
|
Shipping
Weight
|
Shipping
Class
|
| C5
|
Standard
Cabinet
|
63"
|
30
½"
|
34"
|
12-B13204
20-B13202
|
300
|
Blanket
Wrap
|
| C4
|
Standard
Cabinet
|
50"
|
30
½"
|
34"
|
9-B13204
15-B13202
|
300
|
Blanket
Wrap
|
| EC5
|
Elementary
Cabinet
|
63"
|
30
½"
|
31
½"
|
8-B13204
16-B13202
|
300
|
Blanket
Wrap
|
| EC4
|
*Elementary
Cabinet
|
50"
|
30
½"
|
31
½"
|
6-B13204
12-B13202
|
300
|
Blanket
Wrap
|
| C536
|
36"
Wide Standard Cabinet
|
63"
|
36"
|
34"
|
20-B13262
10 Pak Basket
|
350
|
Blanket
Wrap
|
| C436
|
36"
Wide Standard Cabinet
|
50"
|
36"
|
34"
|
15-B13262
10 Pak Basket
|
325
|
Blanket
Wrap
|
| EC536
|
36"
Wide Elementary Cabinet
|
63"
|
36"
|
31
½"
|
16-B13262
10 Pak Basket
|
350
|
Blanket
Wrap
|
| EC436
|
36"
Wide Elementary Cabinet
|
50"
|
36"
|
31
½"
|
12-B13262
10 Pak Basket
|
325
|
Blanket
Wrap
|
Construction
Superstructure fabricated of 1" square stainless
steel and hot rolled tubing with 1 ½" square stainless steel
vertical posts. Exterior sub panels are constructed of 20 gage
galvanized steel, with removable high pressure laminate outer
panels. Top is of 16 gage stainless steel die formed
construction. All welds are ground and polished.
Insulation
Inner liner is encased with 1 ¼" #2000 urethane foam.
Top and corner posts are pour filled with urethane foam.
Interior Tank Well
Constructed of 18 gage stainless steel, die formed with seamless
design all corners coved. Air flow louvers stamped into the
side walls with louvers facing downward.
Electrical
120 Volt/60 Hz./Single Phase 15 Amp circuit required. Cabinet
equipped with a 6' cord with Nema 5-15P plug, which requires a Nema
5-15R receptacle.
Cabinet Lids
2 each ¾" Honeycomb lids covered with high pressure laminate
and trimmed with a stainless steel edge. Designed to slide or
lift off.
Locking Bar
1 each ¾" diameter locking pin is welded at each end of top.
Each pin has two 5/16" diameter holes the upper hole is used to
secure the locking bar. Locking bar fabricated of 18 gage
square stainless steel tubing.
Refrigeration
System
Patented self contained blower coil style refrigeration system
provides re-circulated refrigerated air. Entire unit is easily
removable. 1/3 HP compressor utilizes a hot gas condensate
evaporator, not electric. Requires no floor drain.
Casters
3" diameter plate type with double bearing swivel raceway each
with wheel brakes.
Connecting Bolts
The lower hole of the locking pin is used to join adjacent
Speedee-Serv® cabinets, using a 3/8" bolt with a polished
stainless steel spacer and two acorn nuts.
*Not
recommended due to capacity loss.
Accessories for
Refrigerated Cabinets
AD1
Pan Adapter constructed of 18 gage stainless steel. Holds
one 12" x 20" standard size steam table pan. 1
required per C4, EC4, C436 & EC436 cabinet in conjunction with
1 AD2.
AD2
Pan Adapter constructed of 18 gage stainless steel. Holds
two 12" x 20" standard size steam table pans. 2
required per C5, EC5, C536 & EC536 cabinet.
B13202
2" Wire Basket constructed of 3 gage wire frame, with 9
gage wire mesh bottoms. Baskets are plated with a rust
preventive process. Dimensions: 20 ½" x 13 1/8" x
2 ¼"
B13204
4" Wire Basket constructed of 3 gage wire frame, with 9
gage wire mesh bottoms. Baskets are plated with a rust
preventive process. Dimensions: 20 ½" x 13 1/8" x 4
9/16"
B13204T
4" Basket Tapered constructed of 3 gage wire frame, with
9 gage wire mesh bottoms. Baskets are plated with a rust
preventive process. Dimensions: 20 ¼" x 12 13/16"
x 4 ½"
B13262
10 Pak Wire Basket constructed of 3 gage wire frame, with 9
gage wire mesh bottoms. Baskets are plated with a rust
preventive process. Dimensions: 25 7/8" x 13 ¼" x
2 3/8"
CS15/CS20
Cash Shelf constructed of 18 gage stainless steel. Shelf
is mounted to cabinet on two heavy-duty chrome plated drop leaf
brackets. Dimensions: 15" or 20" x 30 ½"
(36" wide cabinet: 15" or 20" x 36")
TS12/TS15
Tray Shelf constructed of 18 gage stainless steel. Shelf
is mounted to cabinet on two heavy-duty chrome plated drop leaf
brackets. Dimensions: 12" or 15" x 29"
(36" wide cabinet: 12" or 15" x 34 ½")
SN4
Single Sided Sneeze Guard is designed to fit over Models C4,
EC4, C436 & EC436. Entire assembly is lift off
removable. Constructed of 1" square stainless steel
tubing. ¼" thick polycarbonate material is fitted to
top frame.
SN5
Single Sided Sneeze Guard is designed to fit over Models C5,
EC5, C536 & EC536. Entire assembly is lift off
removable. Constructed of 1" square stainless steel
tubing. ¼" thick polycarbonate material is fitted to
top frame.
DSN
Double Sided Sneeze Guard is designed to fit over Models C5,
EC5, C536, EC536, C4, EC4, C436 & EC436. Entire assembly
is lift off removable. Constructed of 1" square
stainless steel tubing. ¼" thick polycarbonate
material is fitted to top frame.
MD62
Double Sided Merchandising Display is designed for Models C5,
EC5, C536 & EC536. Designed to display 6 each wire
baskets. Constructed of 1 ½" square stainless steel
tubing joined together with 1" square and 1" round
stainless steel tubing forming two slanted shelves.
MD49
Double Sided Merchandising Display is designed for Models C4,
EC4, C436 & EC436. Designed to display 4 each wire
baskets. Constructed of 1 ½" square stainless steel
tubing joined together with 1" square and 1" round
stainless steel tubing forming two slanted shelves.
TRS
Tray Slides are designed to mount to both sides of
Speedee-Serv® Speedline equipment. Tray slides are
constructed of 18 gage stainless steel and are mounted to cabinet
on two heavy-duty chrome plated fold down brackets. Also
available in tubular tray slide design.
|
